3
* Specifications subject to change without notice.
SPECIFICATIONS
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code.
Green-and-yellow
: Earth
Blue
: Neutral
Brown
: Live
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter 'E' or by the earth symbol or green-and-yellow. The wire
which is coloured blue must be connected to the terminal which is marked with the letter 'N'
or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with
the letter 'L' or coloured red.
WARNING: This appliance must be earthed.
POWER SUPPLY
230V AC 50Hz, SINGLE PHASE WITH EARTHING
MICROWAVE
POWER CONSUMPTION
1200 W
OUTPUT POWER
800 W(IEC 705)
FREQUENCY
2450 MHz
OUTSIDE DIMENSIONS (W X H X D)
465 X 274 X 352 mm
CAVITY DIMENSIONS (W X H X D)
290 X 200 X 290 mm
NET WEIGHT
APPROX. 13.5 Kg
TIMER
59 min. 99 sec.
POWER SELECTIONS
5 LEVELS
MOULDED PLUGS
Should it be necessary to remove a moulded on plug from the mains cable, it should be cut off and replaced
with a suitable replacement.
The moulded plug cannot be used for any other appliance, therfore remove the fuse and dispose immediately
and safety to prevent anyone, especially children from plugging it in to a wall socket, which will create a safety
hazard. Should the mains lead ever require replacement, it is essential that this operation be carried out by a
qualified electrician and should only be replaced with a fiexible cord obtained from the manufaturer.
applicable only if moulded plug is fitted.
After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost a replacement
cover must be obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the
base of the plug or the colour that is embossed in words in the base of the plug recess or elsewhere on the
plug. Always state this colour when ordering a replacement fuse cover.
Only 13 amp replacement fuses which are ASTA approved to BS 1362 should be fitted.