7
The oven light is on only when the microwave
oven is operating.
The oven door can be opened at any time during
operation by pressing the door release button on
the control panel. The oven will automatically
shut off.
Each time a button is pressed, a BEEP will
sound to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR button is pressed during
the oven operation, the oven stops cooking and all
information retained. To erase all
information(except the present time), press the
STOP/CLEAR button once more. If the oven door
is opened during the oven operation, all
information is retained.
If the START button is pressed and the oven does
not operate, check the area between the door and
door seal for obstructions and make sure the door
is closed securely. The oven will not start cooking
until the door is completely closed or the program
has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POWER button. The chart shows the display, the power level and
the percentage of power.
Press POWER button
Power level (Display)
Approximate Percentage of Power
once
P-HI
100%
twice
P-80
80%
3 times
P-60
60%
4 times
P-40
40%
5 times
P-20
20%
KOR-3000(¿ )-Desuk
2002.11.15
9:45
PM
˘
`
7