10
1. To remove cabinet
1) Remove three screws on cabinet back.
2) Push the cabinet backward.
2. To remove door assembly
1) Remove two screws which secure the stopper hinge top.
2) Remove the door assembly from top plate of cavity.
3) Reverse the above for reassembly.
NOTE :
After replacing the door assembly, perform a check of correct alignment with the hinge and cavity front plate.
Summary of Contents for KOR-1N4A9W
Page 5: ...4 EXTERNAL VIEW 1 OUTER DIMENSION 515 mm 375 mm 304 mm...
Page 25: ...24 WIRING DIAGRAM...
Page 27: ...26 Measure Point MP1 GND MP2...
Page 29: ...28 2 PCB CIRCUIT DIAGRAM...