11
Plug power supply cord into a standard 3-pronged 15 Amp, 120V AC 60Hz
power outlet.
After placing the food in a suitable container, open the oven door and put it
on the glass tray.
The glass tray and roller guide must always be in place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is operating.
The oven door can be opened at any time during operation by pulling the
handle of door. The oven will automatically shut off.
Each time a pad is touched, a BEEP will sound to acknowledge the touch.
The oven automatically cooks on full power unless set to a lower power
level.
The display will show “ : 0” when the oven is plugged in.
Time clock returns to the present time when the cooking time ends.
When the STOP/CLEAR pad is touched during the oven operation, the
oven stops cooking and all information retained. To erase all
information(except the present time), touch the STOP/CLEAR pad once
more. If the oven door is opened during the oven operation, all information
is retained.
If the START pad is touched and the oven does not operate, check the
area between the door and door seal for obstructions and make sure the
door is closed securely. The oven will not start cooking until the door is
completely closed or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
9
10
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by touching the Micro Power pad. The chart shows the
display, the power level and the percentage of power.
Touch the Micro Power
pad
Power level (Display)
Approximate Percentage
of Power
once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
DEAM_KOR1N3AWBAE019AB00,KOR1N3AWWAE019AW00(영)_A5.indd 11
2017-09-18 오후 2:41:10
