9
The oven light is on only when the microwave
oven is operating.
The oven door can be opened at any time during
operation by touching the door release button on
the control panel. The oven will automatically
shut off.
Each time a pad is touched, a BEEP sounds to
acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the Microwave STOP/CLEAR pad is
touched during the oven operation, the oven stops
cooking and all information retained. To erase all
information(except the present time), touch the
STOP/CLEAR pad once more. If the oven door is
opened during the oven operation, all information
is retained.
If the Microwave START pad is touched and the
oven does not operate, check the area between
the door and door seal for obstructions and make
sure the door is closed securely. The oven will not
start cooking until the door is completely closed or
the program has been reset.
OPERATION PROCEDURE(Microwave Oven)
This section includes useful information about Microwave oven operation.
1. Plug power supply cord into a standard 3-pronged 15Amp, 230V AC 50Hz poweroutput.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the Microwave oven door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the M/W pad. The chart shows the display, the power level and the
percentage of power.
Touch M/W pad
Power level (Display)
Approximate Percentage of Power
once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
