background image

6

OPERATIONS AND FUNCTIONS

1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container,
    open the oven door and put it on the glass tray.
    The glass tray must always be in place during cooking.
3. Close the door securely.
4. Choose cooking power level by setting V.P.C knob to
    the desired position.
5. Determine cooking time. Consult cookbook for recipe timing.
    Oven light turns on and cooling fan starts to operate.
    Microwave cooking starts.
6. You may open the door while the oven is operating.
    As soon as the door is opened, the safety mechanisms stop the
    generation of microwave power and the operation of cooking
    timer. If you wish to change the time during cooking,
    simply adujst the timer to the desired time.
7. When the timer reaches zero, a bell will ring and the unit will turn
    off. Oven light turns off. If additional cooking time is needed and 
    the door is closed, the oven will automatically start when the timer is reset.

       To set MICROWAVE cooking
       Set the variable power selector to the desired power level.

       To set GRILL cooking
       Set the POWER SELECTOR to the          (grill) position.
       To set COMBI cooking
       Set the POWER SELECTOR to the          (combi) position.

POWER LEVEL 

SYMBOL 

APPROXIMATE PERCENTAGE OF POWER

HIGH 

MAX 

100%

MED-HIGH 

700W 

88%

MEDIUM 

580W 

73%

DEFROST 

41%

HEAT 

26%

   1. When setting timer for less than 2 minutes, turn the
      timer pass 2 minutes and then return to the correct
      timer setting.
   2. Various clicking noises may be heard when turning
       V.P.C knob. This is normal and does not affect the
       operation of your microwave oven. 

NOTE

   When using the GRILL or COMBI mode;
        Do not open the door so open, the temperature inside the oven decrese and the cooking may not be completed in setting time.     
        Never touch the oven window and metal interior of the oven when taking food in and out, because the temperature inside the 
        oven and door is very high.
        When using these mides, be careful as the tray will be hot to touch, use oven gloves or pot holders while handling tray.

NOTE

***

Summary of Contents for KOG-57470S




























Reviews: