7
The oven light is on only when the microwave oven is
operating.
The oven door can be opened at any time during
operation by touching the door release button on the
control panel. The oven will automatically shut off.
Each time a pad is touched, a BEEP will sound to
acknowledge the touch.
The oven automatically cooks on full power unless
set to a lower power level.
The display will show “ : 0” when the oven is plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR pad is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except the
present time), touch the STOP/CLEAR pad once more.
If the oven door is opened during the oven operation,
all information is retained.
If the START pad is touched and the oven does not
operate, check the area between the door and door
seal for obstructions and make sure the door is
closed securely.
The oven will not start cooking until the door is
completely closed or the program has been reset.
NOTE : When using the GRILL or COMBI mode;
• Do not open the door so often, the temperature
inside the oven decrease and the cooking may not
be completed in setting time.
• Never touch the oven window and metal interior of
the oven when taking food in and out, because the
temperature inside the oven and door is very high.
• When using these modes, be careful as the tray will
be hot to touch, use oven gloves or pot holders
while handling tray.
OPERATION PROCEDURE
This section includes useful information about oven operation.
a. Plug power supply cord into a 230V 50Hz power outlet.
b. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
c. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
9
Make sure the oven is properly installed
and plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power pad. The chart shows the display, the power level
and the percentage of power.
Touch Power pad
Power level (Display)
Approximate Percentage of Power
once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
