20
1. Open the door.
• Oven stops operating.
• You can restart the oven by closing the door and pressing the
START/SPEEDY COOK
button.
2. Press the
STOP/CLEAR
button.
• Oven stops operating.
• If you wish to cancel the cooking settings, press the
STOP/CLEAR
button again.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
CARE AND CLEANING
Although your oven is provided with safety features, it is important to observe the following:
1. It is important not to defeat or tamper with safety interlocks.
2. Do not place any object between the oven front face and the
door or allow residue to accumulate on sealing surfaces. Wipe
the sealing area frequently with a mild detergent, rinse and dry.
Never use abrasive powders or pads.
3. When opened, the door must not be subjected to strain, for
example, a child hanging on an opened door or any load could
cause the oven to fall forward to cause injury and also damage
to the door. Do not operate the oven if it is damaged, until it has
been repaired by a competent service technician. It is
particularly important that the oven closes properly and that
there is no damage to the:
i) Door(bent)
ii) Hinges and Hookes(broken or loosened)
iii) Door seals and sealing surfaces.
4. The oven should not be adjusted or repaired by anyone except
a properly competent service technician.
5. The oven should be cleaned regularly and any food deposits
removed;
6. Failure to maintain the oven in a clean condition could lead to
deterioration of the surface that could adversely affect the life of
the appliance and possibly result in a hazardous situation.
BEFORE YOU CALL FOR SERVICE
Refer to following checklist, you may prevent an unnecessary service call.
* The oven doesn’t work :
1. Check that the power cord is securely plugged in.
2. Check that the door is firmly closed.
3. Check that the cooking time is set.
4. Check for a blown circuit fuse or tripped main circuit breaker
in your house.
* Sparking in the cavity;
1. Check utensils. Metal containers or dishes with metal trim
should not be used.
2. Check that metal skewers or foil does not touch the interior
walls.
If there is still a problem, contact the service station.
A list of these stations is included in the oven.
ABNORMAL MESSAGE
• If the inside temperature of the oven is higher than expected or the
temperature sensor doesn't work properly, “
Err 2
” message will be
shown in the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected, “
Err 3
” message
will be shown in the display.
• Unplug the power and call our technical service.
