KOC-9HAFDB_
12
»G
ENERAL
• If you want to set something, it is important that the display shows the ':0' and not a selected
function. If you always press the stop button first, you can be sure that this is the case.
• When the microwave finishes the programme, you hear three beeps and the display shows
"End". The microwave will continue to give a beep every minute until the stop button is
pressed or the door is opened.
• When the function has finished, the fan will continue to run for some time to cool down. The
display will show the ':0' and "COOL" alternately.
• When you open the door, a running programme stops. This also happens if you press the
stop button. The fan will continue to run. You can start the programme again by pressing the
start button.
• Do not use the microwave if it is empty.
• After the grill/oven/combi function has been used, you must let the microwave cool down
before you use it again. Use over and above normal domestic usage may cause thermal cut-
out to function.
To set Stand-by power "0" mode
1. Push the STOP/CLEAR
button.
“ : 0” appears in the display.
2. Press and hold the STOP/CLEAR button until display is turned off.
3. To cancel the stand-by power "0" mode, press and hold Power on button until display is
turned on. The oven is again available for normal use.
The oven goes to Stand-by Power "0" mode automatically after 10 minutes without using.
1. To turn on the oven, press and hold Power On button until display is turned on and beep
sounds after plugging in.
The oven goes to STANDBY POWER “0” mode automatically after 10minutes without using
or press and hold STOP/CLEAR button until display is turned off.
»S
TAND-BY POWER "0"
»P
OWER ON
This function is used for saving energy.
This function is used for turning on the oven.
Operation
Lowe's_KOC-9HAFDB_KOC-8HAFTBAE017AB00(영).indd 12
16. 1. 21. 오전 10:56