EN - 20
The excess grease can be removed with
a soft cloth or sponge soaked in hot water,
and the cleaning cycle can be carried out as
described above.
Removal of the Catalytic Liner
To remove the catalytic liner, remove the
screws holding each catalytic panel to the
oven.
Cleaning the Glass Parts
•
Clean the glass parts of your appliance
on a regular basis.
•
Use a glass cleaner to clean the inside
and outside of the glass parts. Then,
rinse and dry them thoroughly with a dry
cloth.
Cleaning the Stainless Steel Parts (if
available)
•
Clean the stainless steel parts of your
appliance on a regular basis.
•
Wipe the stainless steel parts with a soft
cloth soaked in only water. Then, dry
them thoroughly with a dry cloth.
Do not clean the stainless steel parts
while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt,
water, lemon or tomato juice on the
stainless steel for a long time.
Removal of the Inner Glass
You must remove the oven door glass
before cleaning, as shown below.
1.
Push the glass in the direction of
B
and
release from the location bracket (
x
). Pull
the glass out in the direction of
A
.
x
A
B
To replace the inner glass:
1.
Push the glass towards and under the
location bracket (
y
), in the direction of
B
.
y
B
3.
Place the glass under the location
bracket (
x
) in the direction of
C
.
x
C
If the oven door is a triple glass oven
door, the third glass layer can be
removed the same way as the second
glass layer.
Removal of the Oven Door
Before cleaning the oven door glass, you
must remove the oven door, as shown
below.
1.
Open the oven door.
2.
Open the locking catch (
a
) (with the aid
of a screwdriver) up to the end position.
a
3.
Close the door until it almost reaches the
fully closed position and remove the door by
Summary of Contents for KBE-V65CA
Page 71: ...52282814...
