10
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Hurricane CAT 3 Carpet Washer
Model No. FLR00116
User Manual
Hints and Tips to Cleaning Your Carpet
1.
Lift the cleaner by the
Handle
(1) to move the appliance to the desired cleaning
position.
2.
DO NOT
run the cleaner over the
Mains Cable
(13), hold any excess cable in
your free handle whilst cleaning.
3.
Use steady, moderate forwards and backwards motion whilst cleaning your
carpet.
4.
Always work from back to front across a room to avoid stepping on wet carpet.
5.
Don’t
allow the carpet to get too wet, use no more than two sets of forwards
and backwards paths. Always finish with a drying path
–
the more dry paths the
better.
6.
Wipe any cleaning solution from woodwork and furniture to prevent any
damage.
7.
Allow plenty of time for the carpet to dry and avoid walking on it until it is dry.
8.
Increase air circulation i.e., open doors, switch on fans or using a dehumidifier
will help to dry the carpet thoroughly and prevent mildew or mould.
9.
After the carpet has thoroughly dried, vacuum the carpet with a conventional
vacuum cleaner.
Emptying the Dirty Water Tank (7)
A.
Ensure the mains plug is removed from the
socket before emptying the
Dirty Water
Tank
(7) or cleaning & maintenance.
B.
Once the dirty water has reached the
‘MAX’
mark
shown right, the
Dirty Water Tank
(7)
must be emptied.
C.
Push the
Dirty Water Tank Release Catch
(6)
down and remove the
Dirty Water Tank
(7) clear
of the Carpet Cleaner.
WARNING! DO NOT
continue to use your carpet
cleaner once the ‘
MAX
’ mark
has been reached as permanent damage may occur to the appliance.
A
‘MAX’ mark
B & C
