9
Ceramic PTC Heater
Model No. HEA1896
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Setting the Heat Mode
Press the
Heat Mode Button
(12) to select from:
a.
High Heat (1500W)
–
the
High Heat Indicator
(7)
will illuminate.
b.
Low Heat (750W)
–
the
Low Heat Indicator
(10)
will illuminate.
c.
Eco Mode
–
the
Eco Mode Indicator
(9) will
illuminate.
In Eco mode the heater will vary the power
between 750W and 1500W automatically whilst
keeping the ambient temperature at 20
⁰
C.
Setting the Temperature
1.
Press the
Increase
ᴧ
(5) and
Decrease
ᴠ
(13)
buttons until the desired set temperature (in
⁰
C),
is shown on the
Digital Display
(6).
2.
Once the room has reached the set temperature,
the internal fan and oscillation mode (if selected)
will stop. The heater will restart when the
temperature has dropped below the set
temperature, this is quite normal.
Powering Off
Press the
On/Off/Standby Button
(4) to
switch the fan heater off and back into
standby.
After switching off the heater, there will
be a delay of 60 seconds whilst the internal
fan continues running to cool the unit down
before finally switching off.
If the heater is not to be used for a while or it
is to be left unattended, press the
Mains
Switch
(1) to the off (O) position to fully
switch the unit off as shown right: