Operating Instructions
1. Plug the heater into a suitable socket outlet.
2. Press the ON/OFF switch on the side of the unit to the “ON”
position to turn on the heater.
3. Select your desired temperature using the + or – button to
raise or lower the temperature between 15˚C and 30˚C as
shown on the digital display.
4. Select the desired fan speed by pressing the two temperature
buttons together, pressing the buttons will toggle between
High (HH) and Low (LL) as shown on the digital display.
5. When finished, switch off the heater and remove from the
socket outlet after allowing to cool. Store in a cool, dry place
until next use.
Setting the Timer
Your heater has a built in timer that will automatically turn off the
heater after a pre-set amount of time.
1. While the heater is plugged in and turned on press the Timer
button to activate the timer.
2. Repeatedly press the timer button to set the number of hours
before the heater turns off (1-12 hours). To cancel the timer
turn the heater off.
Remote Control
The buttons on the Control Panel are replicated on the Remote
Control unit to allow full remote operation of the heater.
The Remote Control should be fitted with a CR2025 battery (Not
included).