7
Single Electric Blanket
Model No. HEA1484
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3.
Ensure the Blanket is flat on the mattress without any creases or folds.
4.
Now you can fit your own bed sheet on top of the blanket.
5.
Push the controller plug fully
into the socket on the
blanket – see Fig. (a) right:
6.
Insert the mains plug into
the mains socket.
Using Your Electric Blanket
This blanket is only to be used with the controller supplied with the appliance.
The controller has raised markings to allow for easy temperature adjustment in
the dark.
The
Neon Indicator
(2) in the controller illuminates when the blanket is switched
on.
On initial use it is recommended that the blanket be set on 1 (Low-Heat) for a
period of two hours to dry any moisture in the blanket and mattress.
During the first few minutes of initial use, you may notice a slight odour.
This is normal and will quickly disappear, It is the coating applied to the
heating elements to prevent any corrosion during transit.
This blanket should never be used whilst folded or rucked as this will cause
overheating and the operation of the thermal safety device and stop the product
working.
Detaching the Controller
Before removing ensure the controller is set to
‘
0
’
(OFF) position and remove the
mains plug from the wall socket.
Lift the locking tab up and pull the controller socket directly out as shown below.
Do not pull the controller cable or try and pull the controller socket out without
lifting the locking tab as the socket may be damaged.
The controller settings are:
0
OFF
1
Low Heat
2
Medium Heat
3
High Heat
Fig. (a)
