16
17
If the refrigerator can not pass through a door
during installation, follow these steps.
Remove front bottom cover first, if it is attached.
Removing Freezer Door
1
Remove the bottom cover first.
Pull out the left collar of the coupling
first, then hold the coupling and pull out
the left water tube.
(Dispenser Models Only)
3
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
4
Lift up the front of hinge to remove.
( After the hinge is removed the door
can fall down forward. Be careful !)
5
Be careful not to damage the water line
when removing the door.
2
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
1
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
3
Lift up the front of hinge to remove.
(After the hinge is removed the
door can fall down forward. Be
careful !)
4
Lift the door straight up to remove.
2
Unscrew top hinge cover with a
screw driver.
Removing Refrigerator Door
Installation Preparation
Dimensions (including Door Handles)
(Width*Depth*Height)
903mm
734.5mm
1790mm
Sufficient space from refrigerator back to the wall for free
air ventilation
Avoid direct sunlight.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5 ), foods can be frozen or the refrigerator can work in
abnormal way.
Check if the refrigerator can pass a doorway or enter a door first.
Find a suitable place to install
!
!
