4
Installation guide
■
Installation preparation
1
Check if the refrigerator can pass a doorway or
enter a door first.
Dimensions
• 954mm × 893mm × 1790mm (Width*Depth*Height)
2
2When installing the appliance in a corner or
recess, check for minimum lateral clearances to
ensure that the doors open all the way.
3
3If the refigerator can not pass through the
doorway, refer to page 14.
■
Installation process
1
Find a suitable place to install
•
Avoid direct sunlight.
• Ensure sufficient space from the back of refrigerator
to the wall for free air ventilation
• Make sure that the floor is solid and level.
(Unstable installation causes vibration and noise of
refrigerator.)
•
The installaion location should be away from any heat
source, e.g. stove or radiator (if this is unavoidable, a
suitable heat insulator should be used (not supplied).
2
Aligning the appliance
•
Close the doors
and put a flat-blade
screwdriver into
groove of the wheel.
•
Turn the wheel
clockwise to raise the
level or anti-clockwise
to lower the level.
More than 5cm
Mo
re
tha
n 5
cm
793
1355
1254
410
333
1693
5
AD8082-16(영).indd 4
2015-04-30 오전 11:32:20
