17
If the refrigerator can not enter
the door, follow these steps.
16
Installation Preparation
Dimensions( including Door Handles)
(Width*Depth*Height)
942mm
803mm
1812mm
FRS-T20***
FRS-T24***
(Width*Depth*Height)
942mm
883mm
1812mm
Sufficient space from refrigerator back to the
wall for free air ventilation
Avoid direct sunlight.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5 ), foods can be frozen or the refrigerator can work
in abnormal way.
Check if the refrigerator can pass
a doorway or enter a door first.
Find a suitable place to install
Remove front bottom cover first, if it is attached.
Removing Freezer Door
!
!
@
!
@
1
Remove the bottom cover first.
Pull out the left collar of the coupling
first, then hold the coupling and pull
out the left water tube.
3
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
4
Lift up the front of hinge to remove.
( After the hinge is removed the
door can fall down forward. Be
careful !)
5
Be careful not to damage the water
line when removing the door.
!
@
!
@
2
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
1
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
3
Lift up the front of hinge to remove.
(After the hinge is removed the door
can fall down forward. Be careful !)
4
Lift the door straight up to remove.
!
2
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
!
Removing Refrigerator Door
