The LCD light turns on in the following case to help you control the panel easily ;
When the refrigerator is pluged in
When you push a button (The background light turns on first, then button mode is activated.)
When you open the door
If you push a button when the backlight is off, only the backlight turns on and it does not affect any other button mode.
The LCD light turns off in the following case to save energy consumption ;
1 minute after power plug in
10 seconds after the door is closed
No other button is pushed for more than 1 minute after button selection
When you look at LCD display from side or down, not from front, the display (letters, icons and signs) can look faded or dim.
Control Panel
5
Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.
In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with
1 minute interval.
LCD Background Light
Optical Sensor
4
Never install the refrigerator on a wet, watery floor or where water can easily gather.
Check the following before power connection.
Connect power plug only to a grounding wall receptacle (an earthed mains).
Do not plug refrigerator power together with other appliances to a same receptacle(socket).
Do not use an adapter plug or an extension cord.
Do not let power cord be crushed down by other (heavy) objects .
If you hear strange noise or strong chemical odor or find smog etc. from the refrigerator after
power plugin, pull out the plug immediately and call the service.
Wait about 5 minutes before you plugin again in order to prevent any
damage to the compressor and electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after first power plugin, then store foods in.
(There can be some peculiar smell of plastic parts at initial operation of refrigerator after plugin.
The smell fades away as refrigerator works and doors are opened and closed.)
Precautions in installation and power connection
To prevent fire, electric shock or leakage
Precautions in use
To prevent personal injury, fire, electric shock etc. read this user guide carefully before use and
keep it at hand for any reference.
Read these safety instructions carefully before use and follow precautions for your safety.
Accessories
Installation Guide
E
gg case Egg cradle Filter Box Water supply Kit User guide
If you fill the refrigerator with much foods or in case of frequent
door openings, Speed Mode starts automatically to maintain
optimal condition of temperature.
Optical Sensor in the top center of the panel senses the
amount of light surrounding the refrigerator.
- When it decides that it is dark (night), Silence Mode starts.
Refrigerator works on in minimum operation condition, so it
makes little or less working noise.
- [Notice] Do not let the Optical Sensor be covered by memo
sheet (Post-it) etc.
It shows that the digital control system is working the
refrigerator. (The icon is always on while the refrigerator is
working.)
As long as the refrigerator is working deodorization is always
on.
The NORMAL (Green LED) is ON for 6 months after the first
installation of refrigerator.
- When the time comes to change the filter or RESET, press
the [ICE MAKER LOCK] for 3 seconds or more while
pressing the [LOCK] button, then the LED will change to
NORMAL(Green).
Children may push any button on the panel for fun, resulting
in disorder of temperature and function of refrigerator.
- Press this button to lock out this case and to keep
temperature and function setting.
- Push Lock button again for more than a second to stop it.
For your convenience you can select WATER / CUBED ICE or
CRUSHED ICE.
A rectangle line around the icon lights up to indicate your
selection is ON.
To obtain the water or ice, push the pad smoothly with your cup
and your selection will come out 1~2 seconds later.
- Try to avoid placing the rim of your glass near the bottom of
the pad, otherwise Water or Icecubes may spill or splash.
- You will hear a snap sound 2 seconds after the icecubes
come out. This is from the shut off ice-out valve.
- Wait 2~3 seconds after pushing the pad to get all the
available water or ice cubes.
If you need total silence from the refrigerator just push
sleep button.
This mode works for maximum 12 hours and then it
returns to the previously set mode.
When you want to stop the mode, just push the button
again and it also returns to the previously set mode.
When cleaning the icecubes case assembly or when you
do not use for a long period of time, remove the icecubes in
the ice storage case and press the button to stop making
icecubes.
