17
If the refrigerator can not enter
the door, follow these steps.
16
Installation Preparation
❈
Sufficient space from refrigerator back to the
wall for free air ventilation
❈
Avoid direct sunlight.
Once the installation place is ready follow the installation instructions.
If surround temperature of refrigerator is low (below 5 ), foods can be frozen or the refrigerator can work
in abnormal way.
Check if the refrigerator can pass
a doorway or enter a door first.
Find a suitable place to install
❈
Remove front bottom cover first, if it is attached.
Removing Freezer Door
!
!
@
!
@
1
Remove the bottom cover first.
Pull out the left collar of the coupling
first, then hold the coupling and pull
out the left water tube.
3
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
4
Lift up the front of hinge to remove.
( After the hinge is removed the
door can fall down forward. Be
careful !)
5
Be careful not to damage the water
line when removing the door.
!
@
!
@
2
Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
1
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
3
Lift up the front of hinge to remove.
(After the hinge is removed the door
can fall down forward. Be careful !)
4
Lift the door straight up to remove.
!
2
Unscrew top hinge cover with a
screw driver.
Insert a thin screw driver into the
side groove of the cover to remove.
!
Removing Refrigerator Door
Dimensions( including Door Handles)
(Width*Depth*Height)
928mm
896mm
1808mm
FRS-280***
(Width*Depth*Height)
928mm
816mm
1808mm
FRS-250***
