3. Dispenser Micro Switch (Dispenser Models Only)
1) Disassembling Procedure (Features are model dependent)
2) How to check the Hose Ice Maker Tube As.
HOW TO CHECK EACH PART
No
No
Dispenser Button and pull up.
1
Pull out the Micro Switch.
( Be careful not to damage the hook. )
Procedure
Procedure
2
Insert (-) screw driver into bottom hole of
; Check both terminals (Red circle) with a Multi-Tester.
(Test Mode : Resistance )
; (If defective) Exchage new one.
OFF (Open)
Disconnected
No Value
Tact Switch (Blue circle)
Some Value
Test Result
Termainals (Red circle)
ON (Close)
Connected
32
Summary of Contents for FRN-U20BV
