Refrigerator Leveling &
Door Adjustment (If needed)
✽
Before operation of accessories, it shall be ensured
that the refrigerator is disconnected from the power.
✽
Before adjusting the levelling feet, precausions shall
be taken to prevent any personal injury
✽
The refrigerator must be level in order to maintain
optimal performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, the
freezer and refrigerator doors may look unbalanced.)
[Levelling Feet]
a)
Turn the feet clockwise to raise the refrigerator.
b)
Turn the feet anticlockwise to lower the
refrigerator.
c)
Adjust the right and left feet based on the
procedure above to a horizontal level.
Front Cover
After installation and/or door leveling, fasten front
cover with screws. (Remove the screws on the front
bottom panel first. Click and screw the cover.)
[Levelling Door]
•
When the fridge door is lower
than freezer door,
Open the door, use the wrench to loosen the
‘Locking nut’ and to rotate the ‘Adjusting nut’ and
anticlockwise to raise the height of the door. Once
the doors are aligned, then tighten the’Locking nut’
by rotating it anticlockwise.
•
When the fridge door is higher
than freezer door
Open the door, use the wrench to rotate the
‘Adjusting nut’ clockwise to lower the height of the
door. Once the doors are aligned, then tighten
the’Locking nut’ by rotating it anticlockwise.
Caution
The front of the refrigerator needs to be just a little
higher than the back for easy door closing, but if the
wheel is raised too much for door balance, i.e. the front
of refrigerator is much higher than the back, it can be
difficult to open the door.
