background image

19

!

@

!

@

!

@

!

@

1

Insert  the  bottom  hole  of  refrigerator  door
straight to the bottom hinge pin.

2

Let the top of door close to the cabinet and
insert  the  top  hinge  pin  to  the  top  hole  of
freezer door.

( Insert the back of hinge to the groove of
protrusion first, then front to the top hole of
door.)

3

Turn the fastener clockwise several times.
(Do not turn it to the end.)

Adjust the level of door and fasten the top
hinge with 2 (left & right) screws.
Turn the hinge fastener tightly to the end.
Connect harness wirings and screw ground
wire.
Click and screw the top hinge cover.

Replacing Refrigerator Door

18

!

@

!

@

!

@

!

@

1

Insert  the  bottom  hole  of  freezer  door
straight to the bottom hinge pin.

2

Let the top of door close to the cabinet and
insert  the  top  hinge  pin  to  the  top  hole  of
freezer door.

( Insert the back of hinge to the groove of
protrusion first, then front to the top hole of
door.)

3

Turn the fastener clockwise several times.
(Do not turn it to the end.)

Adjust the level of door and fasten the top
hinge with 2 (left & right) screws.
Turn the hinge fastener tightly to the end.
Connect harness wirings and screw ground
wire. 

4

Click and screw the top hinge cover.

Replacing Freezer Door

Summary of Contents for FR SXS-600DLX













Reviews: