Methods of exchanging main parts
(5) Freezer Sensor
1) Remove the aluminum tape from louver insulator.
Take off the freezer sensor.
2) Replacement procedure of the freezer sensor.
1.Cut off the lead wire of old sensor and insert
the heat tube into a new sensor's lead wire.
Solder after connecting the new sensor.
* The sensor's resistance maybe changed, if you do not jone with soldering.
2.Shrink the heat tube by a cigarette lighter after placing the heat tube at the
connected location.
3.Fix the freezer sensor to the fixture with aluminum tape(width of 50mm).
* lnsert the assembly into the louver insulator and fix it with aluminum tape.
(6) Glass tube heater
1) Remove 2 screws that fasten the
evaporator.
2) Slightly pull the evaporator to the arrow's
direction.
-7-
Soldering
Heat tube
Lead wire
F-louver insulator
Evaporator fastening screw
