background image

 

 Below process is for RN-420N (Refrigerant type : R-600a) models.

 Some parts are differ to RF-420N models. ( Hinge Cover, Door Switch, Wire Harness and Button Door Switch. )

 When you change door opening direction ( RF-420N models ), please refer page 20 (Door switch Disassemlby) and below.

How to change Door opening Dirction (Reversable)

No

No

After hiding door wire harness, remove the button Door

Remove top cover hinge screw with (+) driver.

Switch and Cover Bushing.

After unscrewing the  Cover Hinge Harness *T *L, 

Separate the Cover hinge by using driver.

disclose the door wire harness.

Reassemble the cover and button door switch.

And also assemble the door stopper to opposite side.

Remove the Door Switch from the cover hinge.

(Which is located the Door under Cap. )

Remove the Middle Hinge. 

Disconnect all wire connector and hinge.

Assemble Cover Bushing & Stopper to the opposite.

a. Change the location 

(screw & division hinge cap)

b. Change the unnder hinge

Unscrew the Cover Hinge Harness *T *R 

location to the opposite.

and hide the door wire harness.

5

10

3

8

4

9

Procedure

Procedure

7

2

6

1

Refrigerator Door Cap

Hidden
Wire

Button

Cover Bushing

Stopper

Freezer Door

23

Summary of Contents for FR-420N


































Reviews: