Daewoo FR-045DDRWE, Manual

Page: 6 / 12

“MIN”
temperature control ranges from , cold setting, to
5
Electrical Electrical Electrical Electrical Connection Connection Connection Connection
Improper Improper Improper Improper use use use use of of of of the the the the grounded grounded grounded grounded plug plug plug plug can can can can result result result result in in in in the the the the risk risk risk risk
of of of of electrical electrical electrical electrical shock. shock. shock. shock. IfIfIfIf the the the the power power power power cord cord cord cord is is is is damaged, damaged, damaged, damaged, have have have have itititit
replaced replaced replaced replaced by by by by an an an an authorized authorized authorized authorized service service service service center center center center
.
This refrigerator should be properly grounded for your safety. The power cord of this
refrigerator is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power
cord supplied.
This refrigerator requires a standard 115/120 Volt A.C. ~/60Hz electrical outlet with
three-prong ground.
This refrigerator is not designed to be used with an inverter.
The cord should be secured behind the refrigerator and not left exposed or dangling to
prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a
qualified electrician or service technician install an outlet near the appliance. Use of an
extension cord can negatively affect the performance of the unit.
Operating
Operating Operating
Operating Your
Your Your
Your Refrigerator
Refrigerator Refrigerator
Refrigerator
Temperature Temperature Temperature Temperature Control Control Control Control
The temperature control is located inside the refrigerator
compartment on the top. The refrigerator compartment
coldest setting. The first time the unit is turned on, adjust
the temperature control knob to a higher (colder) setting
and run for at least 24 hours before readjusting the temeparture
and placing food inside. This will ensure the cabinet is
thoroughly chilled before food is placed into the refrigerator.
If you choose to change the thermostat setting, adjust the
thermostat by one increment at a time. After each movement of the control knob, allow
several hours for the unit to adjust completely. Large amounts of food may lower the
cooling efficiency of the appliance.
“MAX”