17
Time Lapse Video Cassette Recorder
16
Time Lapse Video Cassette Recorder
✔
• To modify or cancel timer
recording, press the
STANDBY/ON(POWER)
button to cancel the timer
recording mode.
9
Press the SET – (or +) button to set the recording
stop minutes (eg : 00), then press the SHIFT
√
button.
10 Press the SET – (or +) button to select the
recording speed (eg : 18), then press the SHIFT
√
button.
• The cursor is moved to the N/Y position.
11 Press the SET – (or +) button to select “Y”.
Y . . . . . recording will take place
N . . . . . recording will not take place
Programmed timer recording Example 1
• Repeat steps 4 to 11 to program timer recordings for
other days of the week.
• To set two or more timer recordings the same day of
the week, press the SHIFT
†
button, until the cursor
located in the day of the week for the second recording,
then press the SET – (or +) button, to set the desired
day of the week. With each press of the SET – ( or +)
button, the day will change as indicated below.
SET – : ‹– direction , SET + : –› direction
12 Press the MENU button three times, the normal
screen is displayed.
13 Press the STANDBY/ON(POWER) button.
• The timer recording indicator “
”
will light on the
display panel. The VCR is now in timer recording
stand-by mode.
✔
• If the set stop time is
earlier than or the same
time as the set start time,
the VCR will consider the
stop time to be the
following day.
Program Timer Recording
There are two program timer recording methods, daily
recording or recording on certain days of multiple weeks
(weekly recording).
Example 1 : To record on every Thursday from 10 : 00 to
18 : 00 , in 18-hour mode (recording speed)
1
Make sure that the set date and time are correct.
2
Load a cassette tape with erasure prevention tab in
place.
3
Press the MENU, SHIFT
†
, SHIFT
√
, SHIFT
√
buttons
in sequence to display the TIMER PROGRAM SET(1)
menu.
• The white block cursor is on “SUN”(Sunday).
4
Press the SHIFT
†
button, until the cursor is on “THU”.
5
Press the SHIFT
√
button.
• The cursor is moved to the recording start hour position.
6
Press the SET – (or +) button to set the recording
start hour (eg : 10), then press the SHIFT
√
button.
• The cursor is moved to the recording start minutes
position.
7
Press the SET – (or +) button to set the recording
start minute (eg : 00), then the SHIFT
√
button.
• The cursor is moved to the recording stop hour position.
8
Press the SET – (or +) button to set the recording
stop hour (eg : 18), then press the SHIFT
√
button.
• The cursor is moved to the recording stop minutes
position.
