Cold air function circulates cold air for 10 minutes at the end of program. This ensures
that the items are left at a temperature, and that the items will not be damaged Crease
Guard adds an extra 30 seconds after the program to shake clothes in order to protect
against creasing.
Crease Guard means after programming, it adds extra 30 seconds of one-way running
to shake clothes in order to protect against creasing.
The inside temperature and humidity will not affect drying time.
Check the label attached on clothes and choose the right temperature and time
according to the explanation.
The few clothes below 2. 0kg shall be selected with " extra dry"program and "full"
heat for drying.
Accumulated dust, fiber&debris will affect the air circulation inside the
dryer and this will cause longer drying times. It is advise to clean the filter
and inner tube after each use.
Make sure to cut off the power before Cleaning
Make sure open the front door for aeration after
cleaning the inner tube
The lint filter is located at the door opening.
Remove the lint filter and open it out.
do not rinse by water directly
do not neutral scour wipes
do not use gasoline and alcohol wipes
If the filter is cleaned by damp cloth
or in the water. please install after it is fully
dried.
Use wiping cloth to clean filter.
At the end of program, buzzer rings to remind you to take out clothes
from dryer.
8. Clean filter, cabinet and inner tub.
7. Take out the Plug
6. End of Program
Summary of Contents for DWR-C60WN
Page 9: ...When using ...
