8
THE FUNCTIONS OF THE CONTROL PANEL
•
Press this switch to turn the power on or off.
•
It can be used to adjust amount of water according to the size of the
load to be washed.
•
As the button is pressed, water level is selected by
MEDIUM
➝
HIGH
➝
SMALL
➝
LOW
•
It can be used to pre-engage time for wash.
•
It is the button for the partial process or the combination of each
process (wash, rinse, spin) (See page 10)
•
If you want to change wash time, rinse times, spin time, you must
press this button after selecting each process by the process button.
Also, this button can be used to spin only. (See page 10)
•
It can be used to select the full-automatic course.
•
As the button is pressed, course will be selected by following order:
FUZZY
➝
BLANKET
➝
ECONOMY
➝
WOOL
➝
SOAK
•
Operation and temporary stop is repeated as it is pressed.
•
When you want to change course in operating;
press the "START/HOLD" button
➝
Select the course that you want to
change
➝
press the "START/HOLD" button again.
POWER
WATER
LEVEL
RES
PROCESS
CONTROL
ONLY SPIN
COURSE
START/
HOLD
BUBBLE WASHING MACHINE
WASH
SPRAY
RINSE
RINSE
SPIN
FUZZY
BLANKET
ECONOMY
WOOL
WATER
LEVEL
RES.
COURSE
PROCESS
START
HOLD
POWER
SOAK
REMAIN
MIN.
WATER LEVEL
CONTROL
ONLY SPIN
MEDIUM
LOW
SMALL
HIGH