background image

11

GENERAL PROCEDURE FOR OPERATION

1. Add measured detergent to the washer. (Follow manufacturer’s directions for safe use)
2. OPTIONAL STEP

If desired, add measured liquid chlorine bleach to the bleach inlet. use only liquid chlorine
in the bleach inlet.
* Follow manufacturer’s direction for safe use.

3. OPTIONAL STEP

If desired, add measured liquid fabric softener to the softener inlet.

 Pour liquid fabric softener into the dispenser using the amount recommended on the

package. Avoid dripping or spilling any fabric softener on the load.

• 

The dispenser is for liquid fabric softener use only.

4. Close the washer lid (door).
5. Press the power button.
6. Select the cycle. The full automatic cycle has five settings; FUZZY, HEAVY, SUIT(WOOL),

BLANKET, SPEEDY. (See page 9)

7. Press the  START/HOLD  button.

NOTE

 Do not let bleach splash, drip, or run down into washer

basket. 
Undiluted bleach will damage any fabric it touches.

 Do not use this dispenser to add powdered chlorine or

color safe bleach to your wash load. The dispenser is for
liquid chlorine bleach use only.

Bleach inlet

(Symbol)

Softener inlet

(Symbol)

Summary of Contents for DWF-756

















Reviews: