10
GUIDES FOR OTHER USEFUL PROGRAMS
For the partial process or the combinations, or for adding time of each process.
step 1. Press power switch
step 2. Press program button until the indicating lamps make the combinations you want.
If only spin lamp is turned on, that means you will operate your washer for spin only.
If rinse and spin lamp are turned on, that means you will operate your washer for rinse and spin.
step3. Press water level selector as your decision.
step4. Press Start/Hold to start.
1
Press the
power
switch.
❍
WASH
❍
RINSE
❍
ADD
❍
SPIN
ADD RINSE (1 time)
Press the Process
button, one time.
Only Spin
Press the Process
button, two times.
Rinse & Spin
Press the Process
button, three times.
Rinse & Spin &
Rinse
Press the Process
button, four times.
Only Rinse
Press the Process
button, five times.
Only Wash
Press the Process
button, six times.
3
Selecting
Water level &
Water Temp.
❍
HIGH
❍
MID.
❍
LOW
❍
E.LOW
4
Pressing the
Start/Hold
Switch
End of
Washing
It is
Informed
by buzzer
POWER
PROCESS
WATER
LEVEL
HOLD
START
IN CASE OF ONLY DRAIN
1
Press the power button.
2
Press the process button two
times.
(It same with spin only)
3
Press Start/Hold with opening
DOOR.
• After finishing Drain, the Buzzer
is ringing and PCB is displaying
“LE” message.
• After Drain, please turn off the
power.
PROCESS
POWER
HOLD
START
2
Selecting Course
●
WASH
●
RINSE
●
ADD
●
SPIN
❍
WASH
❍
RINSE
❍
ADD
●
SPIN
❍
WASH
●
RINSE
❍
ADD
●
SPIN
❍
WASH
●
RINSE
●
ADD
●
SPIN
❍
WASH
●
RINSE
❍
ADD
❍
SPIN
●
WASH
❍
RINSE
❍
ADD
❍
SPIN
10
