3. DIRECTIONS FOR INSTALLATION AND USE
4
DIRECTIONS
The openings must not
be obstructed by carpet-
ing when the washing
machine is installed on a
carpeted floor.
⏿
⏿
Installation Of the COVER UNDER (Noise Insulation Plate)
⏿
⏿
How To Install On An Inclined Place
ᵄ
The place where it would be exposed to
direct sunlight.
ᵄ
The place nearby a heater or heat
appliance.
ᵄ
The place where it would be supposed
to be frozen in winter.
ᵄ
The kitchen with coal gas and a damp
place like a bathroom.
NOTES
10Cm
Install the washer on a horizontal
solid floor. If the washer is installed
on an unsuitable floor, it could make
considerable noise and vibration.
INSTALLING PLACE
Never install in these places
2
Push the COVER UNDER to
the end. This reduces the
noise from washing machine.
1
In the packing box or
the tub of the washer,
there is the COVER
UNDER. Put the
COVER UNDER at the
bottom of the back.
2
Check the Horizon
Status
Check the position of tub above
the center of the washer.
1
Horizon
Setting
After controlling the height
by turning the adjustable
leg, let the washer put
down to the ground.
Keep the machine body
more than 25cm apart from
the wall surface. It will
make easy cleaning the
drain filter which is equipped
at the back side of it. And if
it comes into contract
vibration may occur.
* The drawing of the COVER UNDER is variant from your model
25cm
