10
THE FUNCTIONS OF THE CONTROL PANEL
Program selector
For switching the washing machine on and off and
for selecting the program.
Can be rotated in both directions.
Even if the program selector rotates while the
program is running, the program is not changed
(except for off ) .
(All program is electronically controlled by
PCB)
Indicator light
The respective indicator lights up, when the
required program segment runs.
Time delay
To pre-engage time for washing.
As the button is pressed, the delayed time is
repeated as following;
2hours
➝
3hours
➝
4hours
➝
• • •
➝
10hours
➝
11hours
➝
max 12hours
This option is enabled with COTTON, COTTON Eco,
SYNTHETIC, Speed Wash, Tub Clean, Sports wear,
Rinse+Spin and Baby care programs.
Button for options
(in addition to the program if required)
Super Express Use reduce the laundry time
or wash the mild dirty.
Rinse +
Extra rinse cycle.
Rinse Hold
No final spin cycle
• The indicator lamp of the buttons lights up if
options are active.
• Canceling options : Press button again.
Start/Hold button
For starting the washing cycle.
(program must have been selected)
Note
The washing time may vary by the amount of laundry, water pressure, water temperature and other
washing conditions. If an unbalanced load is detected the washing time maybe extended. (Maximum
increasing time is about 1 hour.)
In order to use another program, set the program dial to 'OFF MODE' position and check the window
display to ensure the screen is turned off and then select another program by turning the dial.
Spin selector
You can select the spin programs(Spin 400rpm,
600rpm, 800rpm, 1000rpm, 1200rpm) by pressing
the program selector.
400rpm of spin velocity is selected automatically
with WOOL/TUB CLEAN programs in order to
protect damage on laundry.
800rpm of spin velocity is selected automatically
with COTTON/SYNTHETIC/BABY CARE/
SPEED WASH/ SPORTS WEAR/SPIN/
RINSE+SPIN programs.
1200rpm of spin velocity is selected automatically
with COTTON ECO 40 & 60 °C
*Warning : If the washing load is unbalanced the
machine will not be able to reach the
RPM spin speed selected.
DWDNU1221(영)_영국향.indd 10
15. 3. 11. 오후 2:54
