Daewoo DWD-MH1011 Owner'S Manual Download Page 3

Read and understand thoroughly these safety instructions
before use. The items indicated here are very important
safety precautions, which must be followed. We cannot be
held liable for damage caused by non-compliance with the
warning and safety instructions or resulting from incorrect
use or operation.

Technical safety

Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged washing machine.
Before connecting the washing machine, ensure that the connection
data on the data plate (voltage and current) match the electricity
supply. If in any doubt, consult a qualified electrician.
The electrical safety of this washing machine can only be guaranteed
when continuity is complete between it and an effective earthing
system which complies with current local and national safety
regulations. It is most important that this basic safety requirement is
present and regularly tested, and where there is any doubt the
household wiring system should be inspected by a qualified electrician.
The manufacturer cannot be held liable for the consequences of an inadequate earthing system.
Do not connect the washing machine to the mains electricity supply by an extension lead.
Extension leads do not guarantee the required safety of the appliance.
Unauthorized repairs could result in unforeseen dangers for the user, for which manufacturer
cannot accept liability. Repairs should only be undertaken by an approved service technician.
Ensure current is not supplied to the machine until after maintenance or repair work has been
carried out.
If the connection cable is damaged or broken it must only be replaced by an approved service
technician to protect the user from danger.
Faulty components must only be replaced by genuine manufacturer original spare parts. Only
when these parts are fitted can the safety standards of the machine be guaranteed.

To

 

avoid the risk of personal injury or damage to the washing

machine, do not install it in place where it is damp and where
it suffers from rainfall.
Do not install the washing machine in place where it suffers 
from the sun directly, in which plastic or components will be
damaged. It will be shortened the life of your washing machine.
Do not install the washing machine in place  where temperatures
below freezing may occur. Frozen hoses may burst or split. The
reliability of the electronic control unit may be impaired at
temperatures below freezing point.
Do not shoot the washing machine with water when you clean it.
Keep the washing machine away from fire or heat sources.
Before using the washing machine for the first time, check that the transit bolts
at the rear of the machine have been removed. During spinning, transit bolts which is still in place
may result in damage to both the machine and adjacent furniture or appliances.
Turn off the tap if the machine is to be left for any length of time (e.g. holiday), especially if there is
no floor drain (gully) in the immediate vicinity.
Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way
into the machine with the laundry. These may damage components of the machine 

(e

.g. drum),

which in turn can result in damage to the laundry.
Do not wash water-repellent things(e.g. raincoats) with washing machine.
Only remove laundry from the washing machine once the drum has stopped turning. Reaching
into a moving drum is extremely dangerous and could result in injury.

Correct use

Safety with children

Keep children away from the washing machine at all times. To avoid
the risk of injury do not allow children to play on or near it or to
play with its controls. Supervise children whilst you are using it.
Older children may only use the washing machine if its operation has
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
For machines with a 'porthole' door, remember that the porthole glass
will be hot when washing at very high temperatures. Do not let children
touch it.

THIS WASHING MACHINE MUST BE EARTHED.

This appliance can be used by children aged from 8 years and above and 
persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or instru-
ction concerning used of the appliance in a safe way and understand the 
hazards involved. Children shall not play with the appliance. Cleaning 
and user maintenance shall not be made by children without supervision.

Summary of Contents for DWD-MH1011











Reviews: