10
DIRECTION FOR DISASSEMBLY
HEATER AND THERMISTOR
1
Separate the plate t as from the washer.
(Remove two screws at rear)
2
Separate the case detergent as and remove two
screws from panel f.
3
Separate the panel f as from the washer.
4
Separate the cabinet front from the washer.
(Remove the clamp door as and 4 screws)
5
Separate connectors from the heater and remove the
nut by using a box wrench.
6
Remove the earth terminal and loosen the nut by using
a box wrench.
7
Pull out the heater from the tub.