8. FUNCTION OF THE CONVENIENT SERVICE
26
FUNCTION OF THE CONVENIENT SERVICE
■
The test mode of the load movement
You can check the PCB ASS'Y and the condition of each load movement simply.
• The method to enter
1
Press the Power switch button.
2
Press the Option button 3 times while press the Temp button.
At this time, the version is displayed on the Custom LED
3
Each load makes a movement as follows, whenever the Time Delay button is pressed a time.
1200(RPM)
→
C:H (Cold/Hot option)
→
L C (Lock Close)
→
H (Hot valve)
→
C (Cold valve)
→
P (Pre-Wash valve)
→
bb (bubble)
→
dr (drain pump)
→
L O (Lock switch Open)
■
The check mode of the water level frequency
You can check the beginning frequency and the frequency by the variation of the water level.
• The method to enter and operate
1
Press the Power switch button.
2
Press the Time Delay button 3 times while press the Temp button and the Spin button.
3
the beginning display on "18:88 LED" is the current frequency of the water level.
ex)
5 6 2
= 25.62kHz
: It display three number except the first number of 25.62kHz
4
When you press the Temp button a time
→
Cold valve On
2 times
→
Cold valve Off
3 times
→
Drain pump On
