;
;
;
WASHING PROCEDURE
■
TO WASH
!
Before starting washing, check followings.
Lay the drain hose down toward a sink hole.
(In case of NO DRAIN PUMP model)
Place the drain hose in sink or bath.
(In case of DRAIN PUMP model)
Connect the power cord to the power supply outlet.
@
Set the
WASH SELECTOR
to
“WASH · RINSE”.
#
Fill water
in the wash tub to the desired water
level and
add detergent.
(see page 5)
$
Put laundry
in the wash tub.
%
Set the
WASH TIMER
1~15 minutes.
^
After washing,
set the
WASH SELECTOR
to
“DRAIN”
for drain and set the
TIMER
to the proper time.
■
TO SPIN DRY
!
Transfer the clothes into the spin basket and arrange it
evenly.
@
Be sure to put the safety cover and close the inner lid.
#
Close the spin dryer lid.
$
Set the
SPIN SELECTOR
to
“SPIN”
.
%
Set the
TIMER
1~5 minutes.
■
TO RINSE
!
Set the
WASH SELECTOR
to
“WASH · RINSE”.
@
Supply the proper amount of water as not to overflow
the top of the washing tub.
#
Set the
TIMER
2~3 minutes.
$
To
drain the water,
set the
WASH SELECTOR
to
“DRAIN”
and set the
TIMER
to the proper time.
%
Repeat this cycle
until drain water is clean.
(2~3 cycles)
■
OVER FLOW RINSE
!
Set the
WASH SELECTOR
to
“WASH · RINSE”.
@
Keep suppling water. (Adjust water pressure to ensure that
the amount of supplied does not exceed the amount of drain.)
#
Set the
TIMER
6~8 minutes.
$
As soon as the TIMER shuts off or the rinsing
water become clear, turn off the water tap.
%
To
drain the water,
set the
WASH SELECTOR
to
“DRAIN”
and set the
TIMER
to the proper time.
3
