• 15 •
PREPARATIONS BEFORE OPERATION (Continued)
!
DIGITAL AUDIO COAXIAL/OPTICAL OUT
Connects digital audio under play mode into an AV amplifier or a receiver equipped with
digital audio decoder for you to enjoy the theatre-quality sound in your home.
@
VIDEO OUT
Connects composite video signal to input AV or PHONO sockets of TV or monitor to
achieve high fidelity colour reproduction.
#
5.1 CHANNEL ANALOGUE AUDIO OUT
In Dolby Digital and dts, total 6 channels are used. 3 channels for front, 2 channels for
surround and 1 channel for subwoofer. They are front left, front right, center, subwoofer,
rear left and rear right. L stands for front left, R for front right, C for center, LFE for
subwoofer, LS for rear left surround and RS for rear right surround.
$
S-VIDEO OUTPUT
Connects to TV or monitor equipped with S-VIDEO input. In order to achieve a sharper
and cleaner picture than that when connected via VIDEO OUT (composite video).
%
COMPONENT(Y/Pb/Pr) VIDEO OUT
Connects to TV or monitor equipped with Component input . In order to achieve a sharper
and cleaner picture than that when connected via VIDEO OUT (composite video).
^
VGA OUT
Connects to PC monitor. In order to achieve a sharper and cleaner picture than that when
connected via VIDEO OUT (composite video).
&
POWER SUPPLY SOCKET WIRE
Creates POWER between wall outlet and the unit.
*
POWER SWITCH
Turn on or off the main power.
- ON : Press Ò
Ò.
- OFF : Press Ò
Ò.
REAR PANEL
Notes:
¥ Remove the dust protection cap from the optical digital audio output connector and connect the
cable firmly so that the configurations of both the cable and connector match.
¥ Do not connect to the digital audio input of an amplifier that does not have Dolby Digital and dts
decoder when you set the digital out option of setup information to SPDIF/RAW.
DVG-9000N(GB)_DECI 01.9.11 2:46 PM ˘
`
15