2
SAFETY&PRECAUTIONS
SAFETY CHECK AFTER SERVING
Examine the area surrounding the repaired location for damage or deterioration. Observe that screw,
parts and wires have been returned to original positions. Afterwards, perform the following tests and con-
form the specified values in order to verify compliance with safety standards.
1. Insulation resistance test
Confirm the specified insulation resistance between power cord plug prong and externally exposed
parts of the set (RF terminals, antenna terminals, video and audio input and output terminals, micro-
phone jacks, earphone jacks, etc.) is greater than values given in table 1 below.
2. Dielectric strengthen test
Confirm specified dielectric strengthen between
power cord plug prongs and exposed accessible parts
of the set (RF terminals, antenna terminals, video and
audio input output terminals, microphone jack, ear
phone jacks, etc.) is greater than values given table 1.
3. Clearance distance
When replacing primary circuit component, confirm specified clearance distance (d), (d
’
) between sol-
dered terminals, and between terminals and surrounding metallic parts. See table below.
Rating for selected areas
* : Class model only
AC Line Voltage
Region
Insulation
Resistance
Dielectric
Strength
Clearance
Distance(d),(d)
100V
Japan
]
1
M
Ω
/500V DC
1kV
AC 1min.
]
3
110 to 130V
USA &
Canada
-
900V AC 1min.
]
3.2
* 110 to 130V
200 to 240V
Europe
Australia
Latin America
]
10
M
Ω
/500V DC
4kV AC 1min.
]
6(d)
]
8(d
'
)
(a :Power cord)
This table is unofficial and for reference only. Be sure to confirm the precise values for your particular
NOTE
Summary of Contents for DV4K611DZ-T
