7
Press Menu to save the settings and exit from the
Time and Date Set menu.
8
Press MENU again to exit the menu system and
return to normal viewing.
Selecting cable or antenna viewing
You must set the viewing mode for your VCR, choosing
either CABLE (cable system connection) or ANTENNA
(antenna connection). To set the viewing mode:
1
Press MENU to display the menu.
2
Press 3 to select Channel Set.
3
Press 3 to toggle the setting between CABLE and
ANTENNA. When the desired viewing mode is
displayed, press MENU twice to exit.
Programming the channel memory
The VCR’s channel memory determines the channels that
are visible when you press CH/TRACKING
. You can
add or remove channels from memory.
16
Daewoo Video Cassette Recorder User’s Guide
15
Daewoo Video Cassette Recorder User’s Guide
Setting channels automatically (Auto Channel Search)
Make sure that you use the auto channel search feature
during daytime broadcast hours. If you use the auto
channel search feature at late night, you may eliminate
channels that air only daytime programming.
1
Press MENU display the main menu.
2
Press 3 to select Channel Set.
3
Press 1 to select Auto Channel Search mode and
press 3 to detect the channel automatically and the
scanning channel number appears. Wait until the
channel numbers stop changing (one to two
minutes), and one of the memorized channel
appears.
4
Press
CH/TRACKING
to view the memorized
channels.
Removing channels manually
To erase a channel manually,
1
Press MENU to display the menu.
2
Press 3 to select Channel Set.
✔
• Detect Automatically
;A strong cable or
antenna signal in your
area may cause Auto
Detect to mis-detect.
If this should happen,
select 1 or 2 for the
system you have.
Setting up your VCR,
continued
Setting up your VCR,
continued
