10
Daewoo Video Cassette Recorder User’s Guide
9
Daewoo Video Cassette Recorder User’s Guide
Connecting your VCR,
continued
• If you have a coaxial terminal for VHF signals
and twin lead terminals for UHF signals, you
need an adapter(Not supplied) as shown below:
• If you have twin lead terminals for all signals,
you need an adapter(Not supplied) like this:
If your TV does not have Audio/Video inputs, you
have finished connecting your VCR to your TV. If
your TV does have Audio/Video inputs, you may
want to follow the section below.
Connecting to a TV with Audio/Video inputs
1
Connect a video cable to the VIDEO OUT terminal on
the back of the VCR.
2
Connect the other end of the video cable to the
VIDEO IN terminal on the TV.
.
TV
.
TV
TV
.
Connecting your VCR,
continued
•
If your antenna system has two sets of twin
300-ohm leads,
purchase a combiner (available at
electronics stores). Place one set of twin leads
underneath the screws on the combiner and tighten
the screws. Do the same with the other set of twin
leads. Press the cable from the combiner onto the
ANT. IN terminal on the back of your VCR.
Connecting your VCR to your TV
1
Connect one end of a coaxial cable to the RF OUT
terminal on the back of the VCR.
2
Connect the other end of the coaxial cable to the
ANT. IN terminal on the back of the TV.
ANT.IN
VCR
ANT.IN
VCR
.
TV
