Daewoo DV-K884N-SJ, Service Manual

Page: 8 / 128

7
LEADLESS (CHIP) COMPONENT IDENTIFICATION
1. Check the followings before S.M.D Troubleshooting
• Cracked or Chipped Component Body
• Cracked or Separated Solder Joints
• Peeling end Terminations or Fractured Leads
2. S. M. D (Surface Mounted Devices) Identification
1) Chip Resistor Identification
* Standard Chip Resistor Code
2) Chip Capacitor Identification
There is no identification of chip capacitor
REMARK Leadless (CHIP) Components are identified on
schematic by means of "(C)" adjacent to symbol
numbers.
• Rejection of Solder from Copper Pads or Component
• Foreign Matter on Copper Pads
• Solder Bridges
= 12x10 3 (1000) = 12000
Ω
= 12K
Ω
= 47x10° (1) = 47
Ω
X X X
1 2 3
4 7 0
MULTIPLIER (0-9)
2nd SIG. DIGIT (0-9)
1st SIG. DIGIT (1-9)
Examples