Daewoo DV-K784N-JJ, Service Manual

Page: 15 / 128

14
PCB Preamp Assembly Removal
(Fig. 5)
1. Remove the top cover, the front panel and the bottom cover.
2. Disconnect the FPC (A).
3. Remove two(2) screws (B).
4. Remove the PCB Preamp assembly in the direction of the
arrow.
Deck Assembly Removal
(Fig. 6)
1. Remove the top cover, the front panel, the bottom cover and
the preamp assembly.
2. Disconnect three(3) connectors (A) (B) (C).
3. Remove three(3) screws (D).
4. Pull out the Deck Assembly in the direction of the arrow.
Main PCB Assembly Removal
(Fig. 7)
1. Remove the top cover, the front panel, the bottom cover, the
preamp assembly and the deck assembly.
2. Release two(2) tabs (A) and lift out the Main PCB in the
direction of the arrow.
PCB PREAMP ASSEMBLY
REMOVE
ONE SCREW(B)
REMOVE
ONE SCREW(B)
DISCONNECT
THE FPC(A)
RELEASE
ONE TAB(A)
RELEASE
ONE TAB(A)
MAIN PCB
Fig. 5 - PCB Preamp Assembly Removal
DISCONNECT
CONNECTOR (B)
DISCONNECT
CONNECTOR (C)
DISCONNECT
CONNECTOR (A)
REMOVE THREE
SCREWS (D)
Fig. 6 - DECK Assembly Removal
Fig. 7 - Main PCB Removal
INSTRUMENT DISASSEMBLY (Continued)