![background image](http://html1.mh-extra.com/html/daewoo/dv-k486n/dv-k486n_user-manual_3379134012.webp)
5
Press CLEAR to erase the channel.
6
When you are finished removing channels, press
MENU three times to exit from the menus.
Adding channels to memory
If you have removed a channel from memory, you can
easily add it back again. To add channels:
1
Use 0-9 to tune to the channel you would like to add.
2
Press MENU to display the main menu.
3
Press 3 to select Channel Set.
4
Press 2 to select Add/Remove Channels.
5
Press DISPLAY to add the channel.
6
Press MENU three times to exit from the menus.
ADD/REMOVE CHANNELS
Channel 06
is now ADDED.
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 06
is now REMOVED.
Press DISPLAY to add
Press MENU to exit
CHANNEL SET
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type : CABLE
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 06
is now REMOVED.
Press DISPLAY to add
Press MENU to exit
Setting up your VCR,
continued
Daewoo Video Cassette Recorder User’s Guide
16
15
2
Press 3 to select Channel Set.
3
Press 1 to select Auto Channel Search mode and
press 3 to detect the channel automatically and the
scanning channel number appears. Wait until the
channel numbers stop changing. (one to two
minutes).
4
Press
–CH/TRK+
to view the memorized channels.
Removing channels manually
To erase a channel manually,
1
Press MENU to display the menu.
2
Press 3 to select Channel Set.
3
Press 2 to select Add/Remove Channels.
4
Use 0-9 to enter the channel you want to remove.
ADD/REMOVE CHANNELS
Channel 06
is now ADDED.
Press CLEAR to remove
Press MENU to exit
CHANNEL SET
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type : CABLE
Press MENU to exit
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
CHANNEL SET
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type : CABLE
Press MENU to exit
Setting up your VCR,
continued
Daewoo Video Cassette Recorder User’s Guide
✔
• Detect Automatically
;a strong cable or anten-
na signal in your area
may cause Auto Detect to
mis-detect.
If this should happen,
select 1 or 2 for the sys-
tem you have.