36
FUNCTION SETTING
AUDIO
■
DUAL MONO
DUAL MONO
This is the output mode of the L and R signals of the set audio output. If it is set to
"MIX– MONO", the function only works when the DVD being played is 2.0-channel.
•
Stereo
Choose this option, the audio output should be a dummy stereo signal.
•
L-Mono
•
R-Mono
•
Mix-mono
■
DYNAMIC RANGE
DYNAMIC RANGE
Set "OFF" to view a program in the dynamic range as
recorded in the disc. If you hear loud sounds softer and
soft sounds louder, set "FULL".
■
DIGITAL OUTPUT
DIGITAL OUTPUT
•
OFF
No signal is output from the coaxial port.
•
BITSTREAM
Select this when the DVD player is connected with a power amplifier through
coaxial port. Please refer to the page 14. When a Dolby Digital DVD, DTS DVD or
MPEG DVD is played, select this, the coaxial port will output in the corresponding
digital format (source code).
•
LPCM
Select this when the DVD player is connected with a TV or a power amplifier
through an audio cord.
■
DOWNMIX
DOWNMIX
This menu gives you the option of sending either the left and right stereo channels as
a single audio output (Lt/Rt) or the normal stereo output. Stereo is the default
setting.
If you are connecting your DVD player to a Dolby Pro Logic decoder via the coaxial
output, select the Lt/Rt option.
If connecting to a basic stereo audio system select the Stereo option.
–
– FULL
–
–
–
– 3/4
–
–
–
– 1/2
–
–
–
– 1/4
–
–
–
– OFF
Eastern
DV-3000S
(Eng)
2008.7.9
11:36
AM
˘
`
36
