background image

SOUND CONTROL

Press the MENU button.

Place the selection bar to the Sound with UP/DOWN button.

Press the RIGHT button to call up Sound menu.

Select the required function by moving the selection bar ith  the UP /
DOWN buttons.

Press the RIGHT button to call up the each sub-menus.

Equalizer :
There are four possible choice considering your preference:

"Favourite, Music, Speech, Normal".

In Favourite mode you can adjust a level at each frequency band with
LEFT/RIGHT button . 

Effect :
There are four possible choice considering your preference:

"Normal, Spatial, Panorama, Dolby Virtual"

Smart Sound Selection
When you press the sound effect button (

) repeatedly, you can call up

easily one of the following:

1. Available only for Dolby Virtual option.

Normal->Favourite->Music->Speech->Spatial->Panorama->Dolby Virtual->
Normal...

2. Available only for Non-Dolby Virtual option.

Normal->Spatial->Normal...

Balance :
Balance the loudness of the left and right speaker .

SOUND MODE
There may be cases of stereo broadcasts where excessive noise will be
heard due to weak incoming signal.  
You may be able to eliminate this noise by selecting the MONO mode. 
Press the Sound Mode (

)  button to change to MONO from

STEREO.  
Then the "MONO" colour will be changed in Red.
Pressing this button again will change it back to stereo.

During a bilingual programme transmission, pressing the Sound Mode but-
ton will change the language to the second channel (DUAL

II

). 

Pressing again will change it back to the main channel (DUAL

I

). 

SETTING THE CLOCK 

Position the selection bar to the Timer in the Main Menu.

Press the RIGHT button.

Place the cursor to Hour / Minute with LEFT /RIGHT button.

Set the hour / minute with the UP/DOWN buttons.

Place the cursor to Clock with LEFT/RIGHT button and then press the
Menu button to compelet. 

Note that if you turn the TV off with MAIN POWER (ON/OFF) button, the
clock setting is lost and must be reset if necessary.

8

TIMER

Sound

Effects

Balance

Equalizer

Position                          

Access        

Return

M

Sound

Bass

Balance

Treble

Position                          

Access        

Return

M

Sound

Effects

Balance

Equalizer

Position                               Adjust        
Return

M

100
300
1  K
3  K
10K

Music
Speech
Normal

Favourite

Sound

Equalizer

Balance

Effects

Position                             Return

M

Spatial
Panorama
Dolby virtual

Normal

Sound

Equalizer

Effects

Balance

L/R                             

00

:  available only for Dolby 

Virtual option.

Summary of Contents for DTW-28W2 Series














Reviews: