Daewoo DTR-14D9ME, Service Manual

Page: 7 / 58

-6-
ALIGNMENT INSTRUCTIONS
- If you decrease the SCR BRM value,
the adjusted Screen Voltage will be increase.
- Recommended SCR BRM Value : 420 20 (It will be changed for some particular CRT)
3-3. Press the “S2” button without any signal,
then the Screen OSD bar is appeared with Blue-Back screen.
3-4. Preparatory Focus (G1) Alignmet
- You must try to Focus Alignment roughly for exact SCREEN alignmet.
3-5. Adjust the Screen Volume of FBT in order that
the ‘RED’ OSD indicating Bar change to ‘BLACK’
(the numeric indicator must be 28~36)
3-6. Press the “S2” button again to release SCREEN Adjust mode.
FACTORY
+ 00016 G2-SCREEN
(Before Screen Adjustment)
FACTORY
+ 00032 G2-SCREEN
(After Screen Adjustment)