Operating Your TV
Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter-
ies in the remote, you are ready to use the TV. The first thing you should do is to program your TV
so it memorizes all of available channels.
Turning Your TV On
1
To turn your TV on, press the POWER button on the remote control. You
can also use the POWER button on the front panel. Make sure your TV is
plugged in before you try to turn it on.
Programming Your TV's Channel Memory
Your TV's memory determines the channels that are available using the
W
CH
V
buttons. If a chan-
nel is not in memory, you cannot tune to it with the number buttons and the
W
CH
V
buttons.
Follow these steps to program your TV's memory:
1
With the TV on, press the MENU button twice, then “Set-Up” menu will appear.
2
Use the
W
CH
V
buttons to select “Reception”, then use the
C
VOL
B
buttons to select ‘Air’ or
‘Cable’. If you connected an antenna to your TV, select ‘Air’; If you connected a cable system,
select ‘Cable’.
3
Use the
W
CH
V
buttons to select “Memorize Channels”, then use the
C
VOL
B
buttons to enter
the “Memorize Channels” process.
4
Press the MENU button to return to Set-Up menu.
5
Press the MENU button four times to return to normal TV viewing.
Your TV's channel memory will not be affected by a power outage. You will not need to re-program
the memory unless you change the type of cable or antenna connected to your TV.
9
Chapter 3: Operating Your TV
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Power Restore : Off
Ch Labels : To
Adjust
Next
3-1
Press
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Power Restore : Off
Ch Labels : To
Adjust
Next
2
Press
Memorize Channels
Air 11
Memorizing all air channels.
Please, stand by.
Press MENU to cancel and
return to Set-Up menu.
3-2
5
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Power Restore: Off
Ch Labels: To Press
Adjust
Next
4
C H A P T E R
3
