Daewoo DTQ 25G1, Instruction Manual

Page: 16 / 37

14
Chapter 3 : Operating Your TV
Programming Your TV’s Channel Memory
TAND-BY CH VOL MENU
TAND-BY CH VOL MENU
AND-BY CH VOL MENU
AND-BY CH VOL MENU
L Prev WV Move CB Select
Setup
Video
Audio
Timer
Function
L Prev WV Select CB Adjust
Setup
Edit Program
Favorite Ch
Language
Captions
Power Restore
Input
Auto Program
CB
To Press
L
Prev
WV
Select
CB
Adjust
Auto Prog.
Auto Program
Source Air
L
Prev
WV
Select
CB
Adjust
Auto Prog.
Source
Auto Program
CB
To Program
Your TV automatically memorizes the channels you can receive. Once channels are memorized, you
can scan through them using
W
CH
V
buttons on the remote control or on the TV.
3. Press
W
CH
V
buttons on the remote control or on the TV to select ‘Auto Program’ and press
C
VOL
B
buttons on the remote control or on the TV.
4. Press W CH V buttons on the remote control or on the TV to select ‘Source’ and press C VOL B
buttons on the remote control or on the TV. If you connected to antenna to your TV, select ‘Air’, if
you connected a cable system, select ‘CABLE’.
Auto Programming Function
1. Select Auto Program following step 2 and 3 in “SOURCE selection” above.
2. Press C VOL B (button an the remote control or on the TV) to start auto programming process. The
TV will automatically cycle through all the TV or CABLE channels on the mode selected by the
Air/Cable mode, and store active channels in the channel memory
3. Press menu button on the remote control or on the TV repeatedly to exit on-screen menu when
channel programming is complete. This process takes a few minutes.
4. Even if you don’t press any button, the on-screen menu disappear after a few second.
SOURCE Selection
1. Press power to turn on the TV.
2. Press menu button on the remote control or on the TV to display the main menu.
2
3
4
2