Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal.
However, If you’ve connected another component to your TV(such as a VCR) using
the Video/Audio input, you will want to be able to view the signal from the compo-
nent.
To do this, you will need to switch from the ‘ TV’ input to the ‘ Line’ Input, as fol-
lows.
1
With the TV on, press the MENU button twice, then “ set-up” menu will appear.
2
Use the
V
CH
W
buttons to select “ Input”.
3
Press the
C
VOL
B
buttons to change from ‘ TV’ to ‘ Line’.
4
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to
the Video/Audio in jack on the front your TV, and your TV’s back panel at the same
time, the former takes precedence of the latter.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
1
Select
Set-Up
Language : English
Input :
Line
Adjust
Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
14
Chapter 3: Operating Your TV