Changing Channels
You can change channels in three ways:
1 The
W
CH
V
buttons will take you through all memorized chan-
nels, one by one. The
W
CH
V
buttons will not access chan-
nels that have not been programmed into the TV's memory.
For more information about programming channels into memo-
ry, see the section “Programming your TV's Channel Memory,”
above.
2 The number buttons (0-9) will take you to any channel, even if it
has not been memorized. To change to a channel, enter its
number; the TV will tune to the new channel when you enter
the second digit of the channel.
3 The PREV. CH button will take you instantly to the favorite
channel it was in memory.
Changing the Volume
1 To change the volume of the TV set, use the
C
VOL
B
buttons
on the remote or on the front panel.
2 To quickly turn off the sound, press the MUTE button on the
remote. To return the volume to its previous level, press the
MUTE button again.
Changing the TV's Channel Memory
Your TV's memory determines the channels that are available using the
W
CH
V
but-
tons. You can add channels to this memory or remove them from memory. If a chan-
nel is removed from memory, you can tune to it with the number buttons, but you can-
not tune to it with the
W
CH
V
buttons.
Adding a channel to memory
1 Use the number buttons to tune to the channel.
2 Press the ADD/ERA button on the remote control. The channel
will turn from red to white to show it has been added.
13
Chapter 3 : Operating Your TV
1
2
1
2
3
1
2
Summary of Contents for DTQ-20T3
Page 31: ...P N 48586201E10D R0 ...
